Oven and range repair in Denver costs $120–$550 in May 2026, depending on whether your unit is electric, gas, or dual-fuel and which component failed. An electric bake element runs $150–$280. A gas oven glow-bar igniter runs $180–$280. A control board can hit $250–$500 because boards are increasingly OEM-only. Premium ranges — Wolf, Viking, Thermador — run higher still on parts but are almost always worth repairing. This guide breaks down repair pricing across all three fuel types, what drives each cost, and when a repair makes sense.
All prices below include parts and labor in the Denver metro as of May 2026 on standard residential ovens and ranges. The premium-brand tier is covered in its own section near the end.
Oven & Range Repair Cost Table (Denver, 2026)
| Repair | Fuel type | Parts | Labor | Total |
|---|---|---|---|---|
| Bake element | Electric | $40–$120 | $110–$160 | $150–$280 |
| Broil element | Electric | $40–$120 | $110–$160 | $150–$280 |
| Surface coil / element | Electric | $25–$90 | $90–$140 | $120–$220 |
| Control board (ERC) | Electric | $130–$350 | $120–$160 | $250–$500 |
| Temperature sensor | Electric | $25–$70 | $95–$140 | $120–$200 |
| Hot surface igniter | Gas | $50–$120 | $120–$160 | $180–$280 |
| Oven glow-bar igniter | Gas | $50–$120 | $120–$160 | $180–$280 |
| Spark module | Gas | $80–$170 | $120–$160 | $200–$320 |
| Spark electrode | Gas | $20–$60 | $95–$140 | $120–$200 |
| Safety / gas valve | Gas | $110–$230 | $130–$180 | $250–$400 |
| Convection fan motor | Dual-fuel / Electric | $70–$170 | $120–$160 | $180–$320 |
| Infrared broiler element | Dual-fuel / Gas | $160–$320 | $140–$190 | $300–$500 |
What Affects Oven & Range Repair Cost
Three variables move any single repair within (or beyond) the range above:
- Fuel type. Electric ranges fail at heating elements and the electronic control. Gas ranges fail at igniters, spark modules, and valves. Dual-fuel ranges combine a gas cooktop with an electric oven, so they carry the failure modes of both plus a convection system. Each fuel type has its own typical repair list and cost band.
- Part availability. Whirlpool, GE, Frigidaire, and Samsung parts ship same-day from Denver-area distributors. Premium-brand parts — Wolf, Viking, Thermador — usually need a 2–5 day order, and the parts themselves cost considerably more.
- Slide-in / built-in installation. Slide-in and built-in wall ovens take longer to remove and reinstall than freestanding ranges. Wall oven repairs that require pulling the unit add 20–40 minutes of labor.
Electric Oven & Range Repairs
Bake Element ($150–$280)
The bake element is the lower heating element that does most of the cooking. When it fails it often blisters or breaks visibly, and the oven either won’t heat or heats far too slowly. It’s one of the most common electric oven repairs and a quick fix — the element unscrews from the back wall of the oven cavity. About 30–45 minutes labor.
Broil Element ($150–$280)
The broil element is the upper element used for high-heat top browning. It fails the same way as the bake element — visible burnout, no heat on broil. Same part type, same labor. If the bake element has failed, the broil element is usually not far behind on an older range.
Surface Coil / Element ($120–$220)
On a coil-top electric range, individual surface burners burn out or lose connection at the receptacle block. The coil simply plugs in and out, but a corroded receptacle block also has to be replaced. Smooth-top radiant elements cost more and require lifting the glass top. This is among the cheapest electric repairs.
Control Board / ERC ($250–$500)
The electronic range control (ERC) governs oven temperature, timers, and digital functions. Failure modes include a dead display, error codes, wrong temperatures, or unresponsive buttons. This is the highest-variance electric repair — OEM-only boards on newer ranges push the cost toward $500. On a standard range past 12 years, a failed board is the leading reason to consider replacement.
Temperature Sensor ($120–$200)
The oven temperature sensor (a resistance probe inside the cavity) tells the control how hot the oven is. When it drifts out of spec, the oven over- or under-heats, preheats slowly, or throws a sensor error. Cheap part, easy access through the back of the oven cavity. Always worth ruling out before condemning the control board.
Gas Oven & Range Repairs
Hot Surface Igniter ($180–$280)
The hot surface igniter lights the cooktop burners on some gas ranges (others use spark electrodes). When it weakens, the burner is slow to light or won’t light at all. It’s a brittle ceramic-element part that should never be touched by hand during installation — skin oil shortens its life.
Oven Glow-Bar Igniter ($180–$280)
This is the single most common gas oven repair. The glow-bar igniter heats up and, when it draws enough current, opens the safety valve to admit gas to the oven burner. As it ages it weakens, draws less current, and eventually can’t open the valve — so the oven won’t heat even though the cooktop burners work fine. Replacement is straightforward once the oven floor panel is removed.
Spark Module ($200–$320)
The spark module (spark ignition module) generates the repeated clicking spark that lights gas cooktop burners. When it fails, burners click continuously and won’t stop, or won’t click at all. The module is usually mounted under the cooktop or at the rear of the range.
Spark Electrode ($120–$200)
Each gas burner has a spark electrode that delivers the actual ignition spark. When an electrode cracks or its porcelain insulator fails, one burner won’t light while the others do. It’s the cheapest gas ignition repair — the electrode pulls out from the burner base.
Safety / Gas Valve ($250–$400)
The oven safety valve is the gas valve the glow-bar igniter opens. It fails less often than the igniter, but when it does the oven won’t heat even with a strong, glowing igniter. Because this repair involves a gas connection, it should always be done by a qualified technician — EPA-certified and properly leak-tested afterward.
Dual-Fuel Range Repairs
Dual-fuel ranges pair a gas cooktop with an electric (usually convection) oven, popular for cooks who want gas burner control with even electric baking. They carry every failure mode above plus two of their own:
Convection Fan Motor ($180–$320)
The convection fan circulates hot air for even baking. When the motor bearing wears, you hear a loud whirring or grinding during convection cooking; when it fails outright, convection mode stops working and bake times go off. The motor sits behind the rear oven wall.
Infrared Broiler Element ($300–$500)
Many dual-fuel and premium ranges use an infrared (ceramic glass) broiler instead of a standard element for restaurant-style high-heat browning. It’s the most expensive heating component on the list — the element assembly itself runs $160–$320 and access requires removing the upper oven panel.
Premium Tier: Wolf, Viking, Thermador
Premium ranges are a different cost calculation. Parts run substantially higher than standard brands:
- Igniter (gas): $280–$420 installed — vs $180–$280 on a standard range.
- Spark module: $350–$550 installed — vs $200–$320 standard.
- Control board: often $450–$700+, OEM-only.
- Infrared broiler: $400–$650 on premium dual-fuel units.
Even at those numbers, a premium range is almost always worth repairing. Wolf, Viking, and Thermador build ranges for 20–25+ year service lives, and replacement runs $6,000–$15,000. A $350–$550 repair against a $9,000 replacement is never a hard decision. These manufacturers also keep parts available for decades, so age alone rarely rules a premium range out. The only time replacement enters the conversation is a catastrophic failure — a cracked oven cavity or multiple simultaneous major failures.
Repair vs. Replace: When Each Makes Sense
The 50% rule applies here too: if the repair exceeds 50% of a comparable new unit, lean toward replacement. A new standard electric or gas range in Denver runs $700–$1,400 in May 2026; a dual-fuel range $1,800–$3,500; a premium range $6,000–$15,000.
- Standard range under 8 years: Repair almost any failure.
- Standard range 8–12 years: Repair elements, igniters, and sensors freely; weigh a $400+ board carefully.
- Standard range 12+ years: Replace if the repair is a $400+ board; repair if it’s a sub-$280 element or igniter.
- Dual-fuel range: Repair through year 12–15 — the replacement cost is high enough to justify most repairs.
- Premium range (Wolf, Viking, Thermador): Repair at virtually any age. Replacement almost never wins the math.
How I Quote — Transparency Up Front
Call (720) 447-8577 with brand, model number, fuel type, age, and symptoms. From those pieces I can usually narrow your repair to 1–2 likely components and quote a tight range over the phone. The $75 diagnostic fee is waived when you book the repair. Every repair includes a 1-year parts-and-labor warranty, and all gas work is performed by an EPA 608 Universal certified technician and leak-tested before I leave.
Want a real quote for your oven or range? Call (720) 447-8577 with brand, model, fuel type, and symptoms. I’ll give you a price range over the phone before scheduling. $75 diagnostic, waived with repair. 1-year warranty on parts and labor.
Frequently Asked Questions
How much does it cost to repair an oven or range in Denver in 2026?
Oven and range repairs in Denver cost $120–$550 in 2026. Electric elements and surface coils sit at the low end ($120–$280), gas igniters and spark modules in the middle ($120–$320), and control boards and safety valves at the top ($250–$500). The diagnostic and labor rate of $110–$170 is included in those totals.
Why won’t my gas oven heat up but the burners still work?
On a gas oven that bakes poorly or not at all while the cooktop burners work fine, the oven glow-bar igniter is the most likely failure. The igniter weakens with age and no longer draws enough current to open the safety valve, so gas never reaches the oven burner. Replacement runs $180–$280 installed and is the single most common gas oven repair.
Is it worth repairing a Wolf or Viking range?
Almost always. Wolf, Viking, and Thermador ranges are built for 20–25+ year service lives, and the manufacturers keep parts available for decades. A $280–$550 igniter or spark module repair on a premium range is a fraction of the $6,000–$15,000 replacement cost, so repair is virtually always the right call regardless of the unit’s age.
Why does my electric oven take forever to preheat in Denver?
Slow preheating usually means a weakening bake element or a drifting temperature sensor. A bake element near the end of its life draws less power and heats slowly before it finally fails, often with visible blistering. A temperature sensor reading high will also stall preheat. Both are affordable repairs at $120–$280.
How much does a stove control board cost to replace?
An oven or range control board replacement in Denver runs $250–$500 installed in 2026. The part itself is $130–$350 depending on brand and whether it is OEM-only, plus $120–$160 labor. Premium-brand boards push toward the high end. On a standard range past 12 years, a failed board is the most common reason to consider replacement.
About Easy Appliances Repair
I’m Victor, owner-operator. EPA 608 Universal certified, 10+ years repairing residential ovens and ranges — electric, gas, and dual-fuel — across Denver and the south metro, with a 5.0-star rating across 121 reviews. Service covers every major brand including Wolf, Viking, and Thermador, and back every repair with a 1-year parts-and-labor warranty. Coverage area: Denver, Highlands Ranch, Littleton, Centennial, Aurora, Parker, Castle Rock, and the rest of the south metro. See our full oven & stove repair service page for details.
