Electrolux Repair in Denver — Washer, Dryer, Fridge & ICON
European-engineered Electrolux laundry, refrigeration, and built-in ICON appliances. Same-day in-home service across Denver Metro with a 1-year warranty.
Electrolux repair in Denver, in one paragraph
Victor is EPA 608 Universal Certified, repairing Electrolux washers, dryers, refrigerators, and ICON built-ins across Denver Metro. The EFLW front-load platform, EFMG dryer, EI-series French Door fridges, and ICON line each have characteristic failure modes — door boot seals, drain pumps, condenser fans, and control boards. Typical repair $180–$520, $75 visit fee waived with repair, 1-year warranty.
Models Serviced
Laundry, refrigeration, and the premium ICON built-in series — all covered with OEM parts.
EFLW — Front-Load Washers
EFLW417, EFLW427, EFLS627 Perfect Steam, and EFLW510 stackable models. Direct-drive inverter motor and the wash-system boot seal on every unit.
EFMG / EFME — Dryers
EFMG417 gas, EFME417 electric, and the Perfect Steam dryers. Moisture sensor, heating element, and high-limit thermostat are the wear parts.
EI-Series Refrigerators
EI23BC French Door, EI28BS side-by-side, and Counter-Depth slide-ins. Full-stainless construction, dual evaporators, and the SmoothFit door system.
ICON Built-Ins
E23BC, E32AR, and the ICON Designer 42-inch built-in column refrigerators. Premium tier — service overlaps with Frigidaire Professional internals.
EI Dishwashers
EI24ID and EIDW dishwashers with the Adaptive wash system. Drain pump, soap dispenser solenoid, and the recirculation motor are the common service items.
Wall Ovens & Cooktops
EI27EW double wall ovens and induction cooktops. Bake element, convection fan motor, and the digital control board on touch-screen models.
Most common failures
Electrolux engineering is solid — but a handful of parts wear predictably.
Door boot seal (EFLW front-load)
The number-one Electrolux laundry repair. Boot tears at the 6 o’clock position, water hits the floor, and mildew sets in. Replaced with OEM gasket and clamps.
Drain pump
EFLW washers and EI dishwashers both share a similar drain pump architecture. Coins, hair pins, and broken glass jam the impeller and either trip an error or burn the motor.
Condenser fan (EI fridge)
EI-series French Door fridges that suddenly stop cooling but the compressor still hums usually have a seized condenser fan. Heat builds up, the compressor cycles off on overload.
Main control board
EI-series and ICON refrigerators throw erratic temperature behavior or display blackouts when the main board fails. OEM board, programmed for your model number.
Dryer heating element
EFMG/EFME dryers running long cycles with cool clothes have either a burned heating coil or a tripped high-limit thermostat (usually from a clogged exhaust path).
Error codes (E11, E13, E20)
E11 fill timeout, E13 leak detected, E20 drain fault. Active codes are read through diagnostic mode and address the root cause — not just the symptom.
Pricing table
Electrolux parts cost more than budget brands, but quality OEM components last. Firm quote before any work starts.
| Repair | Typical Cost |
|---|---|
| Service visit (waived with repair) | $75 |
| Door boot seal (EFLW washer) | $280–$420 |
| Drain pump (washer or dishwasher) | $220–$340 |
| Condenser fan motor | $240–$360 |
| Evaporator fan motor | $240–$360 |
| Dryer heating element | $210–$320 |
| High-limit thermostat / thermal fuse | $180–$260 |
| Main control board | $340–$520 |
| ICON built-in service call | $300–$520 |
Service area
Denver Metro coverage, Monday through Friday, same or next day for most visits. That includes Denver, Highlands Ranch, Littleton, Centennial, Aurora, Parker, Castle Rock, Lone Tree, Greenwood Village, Englewood, Evergreen, and Morrison. For ICON built-in jobs The proper retainer hardware, panel-clamp tools, and a moving dolly — built-ins are heavy and unforgiving of careless handling.